Automatic battery charger Auto Welle AW05-1204

Produktbeschreibung

Automatic Battery Charger Auto Welle AW05-1204 – Könner & Söhnen

The smart car battery charger AW05-1204 TM "AUTO WELLE" is designed for charging lead-acid, gel, and AGM batteries with a capacity of 1.2 Ah to 120 Ah, used in cars, light commercial vehicles, motorcycles, and other vehicles and machinery.The charging cycle consists of 5 stages.

Battery diagnosis and analysis.
Initial charge: Recovery of a deeply discharged battery; the voltage increases gradually.
Main charge: Charging with constant current; the voltage increases gradually; in this phase, the battery reaches 75–80% charge.
Final charge: Charging at constant voltage; current increases gradually; in this mode, the battery reaches 100% charge.
Trickle charge mode: The battery is maintained at 100% charge level and is ready for use.

Packaging – cardboard box. ILLUMINATED LCD DISPLAY: The backlit LCD display allows for comfortable use of the charger at any time of day. Next to the charger's display is the Mode button for switching the charging mode.
SLOW CHARGING MODE: If no charging mode is selected manually, the device activates automatically: for 12V batteries – slow charging mode, for 6V batteries – standard charging mode. The charging process is carried out with a reduced current of 0.8 A.
STANDARD CHARGING MODE: Standard charging mode for 12V batteries. Charging takes place with a current of 3.8 A.
WINTER CHARGING MODE: The winter mode is used for 12V batteries when the ambient temperature where the battery is located is below 5 °C. Charging takes place with a current of 3.8 A at an increased charging voltage. This allows the battery to be charged optimally and extends its service life.
CHARGE INDICATOR: The number of rectangles inside the battery symbol indicates the charge level (one rectangle = 20% charge). When the battery symbol has stopped flashing and all rectangles are visible, the battery is fully charged.
MAXIMUM SAFETY DURING THE CHARGING PROCESS: For maximum safety during the charging process, the device has the following protection functions: short-circuit protection, reverse polarity protection (incorrect connection), charger overheating protection, battery overcharge protection.
RUBBER-COATED CLAMPS: The clamps for connecting to the battery are protected by rubber-coated covers.